Справочник Пользователя для Packard Bell C3

 

12

To remove the LCD panel, first remove the LCD module (see 

then perform the following steps:  

1.  Use a pin to remove the rubber covers on the LCD module as shown in Fig. 15  
2.  Unscrew all screws as shown in Fig. 15 and release carefully the LCD cover.  

 
 

 

  Fig. 15 Removing the rubber covers & screws on the LCD Module 

3.  Remove the inverter board after unscrewing the screw and disconnecting all 

connectors as shown in Fig. 16 . 

 
 

 

4.  Carefully lift up the LCD panel. 
5.  Remove the screws on both sides of the LCD panel in order to release the LCD 

hinges as shown in Fig. 17