Справочник Пользователя для Apple DPR2320TM

 

 

If your PC cannot access the Internet after the cable modem is online, it is 
possible that your PC did not renew its IP address. Follow the appropriate 
instructions in this section for your operating system to renew the IP address on 
your PC. 

 

1. Click 

Start, and then click Run to open the Run window. 

2. 

Type winipcfg in the Open field, and click OK to execute the winipcfg 
command. The IP Configuration window opens. 

3. 

Click the down arrow to the right of the top field, and select the Ethernet 
adapter that is installed on your PC. The IP Configuration window 
displays the Ethernet adapter information. 

4. 

Click Release, and then click Renew. The IP Configuration window 
displays a new IP address. 

5. 

Click OK to close the IP Configuration window, you have completed this 
procedure.  

 

If you cannot access the Internet, contact your cable service 

provider for further assistance. 

 

1. 

Open a Command Prompt (DOS) window. 

2. 

Type ipconfig/release at the C:/ prompt and press Enter. The system 
releases the IP address. 

3. 

Type ipconfig/renew at the C:/ prompt and press Enter. The system 
displays a new IP address. 

4. 

Click on the X in the upper-right corner of the window to close the 
Command Prompt window. You have completed this procedure. 

 If you cannot access the Internet, contact your cable service 

provider for further assistance.