Справочник Пользователя для ParkerVision WLAN1500

25

®

The ParkerVision Wireless 

LAN Card is not working after 

the driver installation

Make sure the driver software is installed BEFORE you insert your wireless LAN card 

into your computer.  Failure to install the software fi rst may result in the LAN card being 

recognized incorrectly.

Insert the PCMCIA adapter into your notebook computer’s slot again. The Power and 

Link LED should be on if the adapter is properly inserted.

Make sure there is no hardware confl ict between your ParkerVision Wireless LAN Card 

and other hardware in your computer. If there is a confl ict, you need to set your I/O and 

IRQ manually.

Windows does not auto-

detect the ParkerVision 

Wireless LAN Card

Restart your computer.

Do a manual scan of your computer hardware. 

In Windows 2000, click Start, Settings, Control Panel, System, Hardware, Hardware 

In Windows XP, click Start, Control Panel, Performance and Maintenance, System, 

Hardware, Device Manager. Then Right-click on your computer name and select Scan 

Check your PCMCIA adapter and make sure there is no hardware confl ict.

Try the second PCMCIA slot if one is available on your computer.

Contact ParkerVision Customer Support

Chapter 5 :

Troubleshooting