Справочник Пользователя для ParkerVision WLAN1500

27

®

The ParkerVision Wireless 

LAN Card client cannot 

communicate with the other 

computer on the Ethernet 

when the Infrastructure mode 

is confi gured.

Make sure that the AP and the associated computer are on.

Make sure your computer and the AP use the same SSID.

Make sure both computers are associated with the Access Point.

Use the Windows Ping Command to test communications to the access point’s IP Address.  

Consult your Access Point documentation for the address settings.  If you can Ping the 

Access Point, you should then attempt to Ping the second computer.  The IPCONFIG 

command will display a computer assigned IP Address when entered from a Windows 

Command Prompt.

Use the Site Survey utility to verify operating radio channel has low interference. Change 

the AP and all the stations within the BSS to another radio channel if interference is high.
Make sure that the computer and the AP share the same security option and key.

ParkerVision Status Utility  

Button displays No Signal.

Move your computer closer to the AP within the transmission range.

There is too much radio 

interference (for example 

microwave oven or 

cordless telephone) 

around your wireless 

network. 

Relocate or reduce the radio interference.