Справочник Пользователя для National Instruments NI CardBus-8310-to-PXI Expansion

•

Avoid sharp bends or folds in the cables.

•

Provide enough slack to allow easy device placement.

•

Avoid things that might cause scuffing and abrasion damage to the 
cables.

•

Secure the devices in their shelves using the appropriate hardware.

•

Use the screws or brackets supplied with the device. Suitable mounting 
brackets, adapters, and hardware are available from your local 
computer dealer or retailer.

Table 1-2 lists the components included with your kit.

In order to complete the installation of the CardBus-to-PXI expansion system you 

will need perform the installation in a suitable electrostatic discharge (ESD) protective 
environment.

You can take the following steps to prevent damage from electrostatic 
discharge (ESD):

•

When unpacking a static-sensitive component from its shipping 
carton, do not remove the anti-static packaging material until you are 
ready to install the component in a computer. Just before unwrapping 
the anti-static packaging, be sure you are at an ESD workstation, or 
that you are electrically grounded.

•

When transporting a sensitive component, first place it in an anti-static 
container or package.

Table 1-2.  CardBus-8310 Kit Components

1

NI CardBus-8310

2

3 meter CAT5-e cables with 4 ferrites (two ferrites for each cable). 10-meter 
and 14-meter cables may be purchased separately.

1

NI PXI-8310

1

Software Installation CD (will contain the software driver, full user manual, and 
Documents of Conformity)

1

Installation Guide