Справочник Пользователя для National Instruments NI CardBus-8310-to-PXI Expansion

Скачать
Страница из 43
Chapter 1
Introduction
1-2
ni.com
Figure 1-1 shows the basic architecture of an NI CardBus-8310-to-PXI 
system. The NI CardBus-8310 consists of a CardBus connector, a 
CardBus-to-PXI bridge, a StarFabric bridge and two RJ-45 connectors. The 
NI PXI-8310 consists of two RJ-45 connectors, a StarFabric bridge, and a 
PXI connector.
Figure 1-1.  NI CardBus-8310-to-PXI Block Diagram
Functional Unit Descriptions
This section describes the individual units that comprise an 
NI CardBus-8310-to-PXI system.
CardBus Connector
The CardBus connector allows the NI CardBus-8310 to be used in a laptop 
CardBus expansion slot. This connector is defined by the PCMCIA 
Specification.
StarFabric Bridge
A PCI-to-StarFabric bridge provides an interface between PCI and 
StarFabric by translating PCI traffic into serial frame format for 
transmission across StarFabric. The PCI bus is a 32-bit parallel bus that 
transfers data between a master and a slave at 33 MHz, while the StarFabric 
link can simultaneously transmit and receive at 2.5 Gbps. A standard link 
is made up of four aggregated 622 Mbps LVDS differential pairs in each 
direction.
RJ-45
Connector
RJ-45
Connector
Starfabric
Bridge
Starfabric
Bridge
RJ-45
Connector
RJ-45
Connector
Cardbus-8310
PXI-8310
Cardb
u
s
PXI Bus