Справочник Пользователя для National Instruments NI PXI-1056
Chapter 2
Installation and Configuration
© National Instruments Corporation
2-3
Figure 2-1. PXI-1056 Chassis Airflow Side View
Install the chassis so that you can easily access the rear panel. This
simplifies replacing the air filter or power supply shuttle, if necessary.
simplifies replacing the air filter or power supply shuttle, if necessary.
Setting Fan Speed
, to locate the fan-speed
selector switch. Select HIGH for maximum cooling performance
(recommended) or AUTO for quieter operation. When set to AUTO,
the fan speed is determined by chassis intake air temperature.
(recommended) or AUTO for quieter operation. When set to AUTO,
the fan speed is determined by chassis intake air temperature.
Installing Filler Panels
To improve module cooling performance, install filler panels (provided
with the chassis) in unused or empty slots. Secure with the captive
mounting screws provided.
with the chassis) in unused or empty slots. Secure with the captive
mounting screws provided.
1
Air Outlets (Side of Chassis)
2
Air Intake (Back of Chassis)
1
2