Справочник Пользователя для National Instruments CFP-2220

The DIN rail mounting kit is NI part number 778614-01. You need one kit 
to mount the cFP-BP-4 on a standard 35 mm DIN rail. Complete the 
following steps to mount the backplane on a DIN rail.

1.

Fasten the DIN rail clip to the cFP-BP-4 using a number 2 Phillips 
screwdriver and the 8-32 

× 5/16 in. countersink screws shipped with 

the mounting kit.

Figure 7.  Installing the DIN Rail Clip on the cFP-BP-4

Do not use screws longer than 5/16 in. to fasten the DIN rail clip to the backplane.

2.

Insert one edge of the DIN rail into the deeper opening of the DIN rail 
clip, as shown in Figure 8.

Figure 8.  One Edge of DIN Rail Inserted in Clip

1

DIN Rail Clip

2

DIN Rail Spring

3

DIN Rail

2

1

3