Справочник Пользователя для National Instruments FP-CTR-502

The FP-CTR-502 mounts on a FieldPoint terminal base (FP-TB-x), 
which provides operating power to the module. Installing the 
FP-CTR-502 onto a powered terminal base does not disrupt the 
operation of the FieldPoint bank.

To install the FP-CTR-502, refer to Figure 1 and complete the 
following steps:

1. Slide the terminal base key to either position X, used for any 

module, or position 8, used for the FP-CTR-502 module.

2. Align the FP-CTR-502 alignment slots with the guide rails on 

the terminal base.

3. Press firmly to seat the FP-CTR-502 on the terminal base. 

When the module is firmly seated, the terminal base latch locks 
it into place.

Figure 1.  Installing the FP-CTR-502

The cFP-CTR-502

 

mounts on a Compact FieldPoint backplane 

(cFP-BP-x), which provides operating power to the module. 
Installing the cFP-CTR-502 onto a powered backplane does not 
disrupt the operation of the FieldPoint bank.

To install the cFP-CTR-502, refer to Figure 2 and complete the 
following steps:

1. Align the captive screws on the cFP-CTR-502 with the holes 

on the backplane. The alignment keys on the cFP-CTR-502 
prevent backward insertion.

Alignment

Slot

Key

Latch

Guide Rails

Terminal Base

I/O Module