Справочник Пользователя для National Instruments FP-CTR-502
© National Instruments Corp.
3
FP-CTR-502 and cFP-CTR-502
2. Press firmly to seat the cFP-CTR-502 on the backplane.
3. Using a number 2 Phillips screwdriver with a shank of at least
64 mm (2.5 in.) length, tighten the captive screws to 1.1 N
⋅ m
(10 lb
⋅ in.) of torque. The nylon coating on the screws prevents
them from loosening.
Figure 2. Installing the cFP-CTR-502
Wiring the [c]FP-CTR-502
The FP-TB-x terminal base has connections for each FP-CTR-502
channel and for an external power supply to power the input
channels and field devices. The cFP-CB-x connector block
provides the same connections for the cFP-CTR-502. The V and
V
channel and for an external power supply to power the input
channels and field devices. The cFP-CB-x connector block
provides the same connections for the cFP-CTR-502. The V and
V
SUP
terminals are all internally connected, as are the C and COM
terminals.
1
cFP I/O Module
2
Captive Screws
3
cFP Controller
4
Screw Holes
5
cFP Backplane
2
2
1
3
5
4
4