Справочник Пользователя для Dialogic TX4000 PCI SS7

In a Windows system, any changes that you make to the configuration information 

with the txcpcfg utility are saved automatically. 
In a UNIX system, changes that you make to the configuration information with the 
txcpcfg utility are deleted when you restart the system. Save the changes by editing 

the cpcfg file as described in the following procedure: 

1 

At the prompt in the UNIX system, view the current configuration updates by entering the 
following command: 

txcpcfg 

txcpcfg displays the bus number, slot number, CP number, and CP model type of each TX board 
in the system. For example: 

Bus    Slot    CP Number    CP Model 
2       2       1            TX 4000 
2       8       3            TX 4000 

2 

Using a text editor, open the cpcfg configuration file. The file contains the original configuration 
information that existed before you ran the txcpcfg utility and made changes. For example: 

#  Command    Bus    Slot    CP Number 
txcpcfg        2      2       1 
txcpcfg        2      8       2 

Note: The cpcfg file does not specify the CP model type. The model type is automatically 
determined each time the host operating system is booted. 

3 

Following the cpcfg file format, edit the entry in the cpcfg file for the TX board CP number that 
you are updating. If you are adding a new board, add a new txcpcfg entry to the cpcfg file. 

Continuing with the example in step 1, the board with a CP number of 2 is updated to reflect the 
new CP number of 3. 

#  Command    Bus    Slot    CP Number 
txcpcfg        2      2       1 

txcpcfg        2      8       3 

4 

Save and close the cpcfg file. 

The cpcfg script executes as part of the boot process and applies the new configuration settings.