Справочник Пользователя для IBM EtherLink XL
2
I
NSTALLING
THE
A
DAPTER
There are two types of 3C905B-TX adapters: the 3C905B-TX
adapter and the 3C905B-TX-NM adapter. They are both
installed in your PC and connected to the network in exactly
the same way.
adapter and the 3C905B-TX-NM adapter. They are both
installed in your PC and connected to the network in exactly
the same way.
After you connect the 3C905B-TX adapter to the network,
you connect the Remote Wake-Up cable to the motherboard.
you connect the Remote Wake-Up cable to the motherboard.
Before you begin, make sure that you have the user guide
and the 3C905B-TX adapter EtherDisk diskettes, and that
your PC meets the requirements described in Chapter 1.
and the 3C905B-TX adapter EtherDisk diskettes, and that
your PC meets the requirements described in Chapter 1.
CAUTION: Each adapter is packed in an antistatic container
to protect it during shipment. Before handling the adapter,
touch the metal chassis of your PC. Maintain grounding by
wearing a wrist strap attached to the chassis. Handle the
adapter by its backplate and top edge. Do not touch the
edge connector.
to protect it during shipment. Before handling the adapter,
touch the metal chassis of your PC. Maintain grounding by
wearing a wrist strap attached to the chassis. Handle the
adapter by its backplate and top edge. Do not touch the
edge connector.
To install the 3C905B-TX adapter in your PC or server and
connect it to the network, follow these steps:
connect it to the network, follow these steps:
1 Open the shipping container and inspect each item
for damage.
2 Remove all jewelry from your hands and wrists.
Use only insulated or nonconductive tools.
3 Unplug the PC and disconnect all cables.
4 Remove the PC cover.
5 Choose an empty bus mastering PCI slot.
A sample PCI slot is shown in Figure 2-1. If you do not know
how to identify a PCI slot, check your PC documentation or
ask your system administrator. In most PCs, slots 1 and 2 are
bus mastering slots. Use slot 1 for the 3C905B-TX adapter if
possible. If you have a video PCI card, install it in the last slot
(the one farthest from slot 1).
how to identify a PCI slot, check your PC documentation or
ask your system administrator. In most PCs, slots 1 and 2 are
bus mastering slots. Use slot 1 for the 3C905B-TX adapter if
possible. If you have a video PCI card, install it in the last slot
(the one farthest from slot 1).