Справочник Пользователя для IBM EtherLink XL
2-2
C
HAPTER
2: I
NSTALLING
THE
A
DAPTER
6 Unscrew the screw holding the PCI slot’s backplate
and remove it.
7 Insert the 3C905B-TX adapter into an empty PCI slot,
Make sure that the adapter is firmly seated in the slot.
Figure 2-1 Inserting the Adapter
8 Secure the adapter with the screw you removed
earlier.
If you are installing the Remote Wake-Up connector, go to
“Connecting the Remote Wake-Up Cable,” on page 2-4 at
the end of this chapter before replacing the PC cover.
“Connecting the Remote Wake-Up Cable,” on page 2-4 at
the end of this chapter before replacing the PC cover.
Remote Wake-Up is only supported in systems that provide
a 3-pin header for a Wake-Up cable.
a 3-pin header for a Wake-Up cable.
9 Replace the PC cover and reconnect all previously
connected cables.
10 Turn on the power to the PC.
PCI slot
3C905B-TX adapter
Screw