Справочник Пользователя для ZyXEL Communications vantage cnm

Chapter 5 Device Network Settings

Vantage CNM User’s Guide

Figure 43   Device Operation > Device Configuration > Network > WAN > Setup (Prestige)

The following table describes the fields in this screen.

Table 27   Device Operation > Device Configuration > Network > WAN > Setup (Prestige)

Name

Enter the name of your Internet Service Provider, for example, MyISP. 
This information is for identification purposes only.

Mode

Select Routing from the drop-down list box if your ISP allows multiple 
computers to share an Internet account. Otherwise select Bridge. 

Encapsulation

Select the method of encapsulation used by your ISP from the drop-down 
list box. Choices vary depending on the mode you select in the Mode 
field. 
If you select Bridge in the Mode field, select either PPPoA or RFC 1483. 
If you select Routing in the Mode field, select PPPoA, RFC 1483, ENET 
ENCAP or PPPoE.

Multiplex

Select the method of multiplexing used by your ISP from the drop-down 
list. Choices are VC or LLC.

Virtual Circuit ID

VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) define a 
virtual circuit. Refer to the appendix for more information.

VPI

The valid range for the VPI is 0 to 255. Enter the VPI assigned to you.

VCI

The valid range for the VCI is 32 to 65535 (0 to 31 is reserved for local 
management of ATM traffic). Enter the VCI assigned to you.