Справочник Пользователя для ZyXEL Communications vantage cnm

Chapter 5 Device Network Settings

Vantage CNM User’s Guide

To change your device’s WAN backup settings, click WAN > Backup. The screen appears as 
shown.

Max Idle Timeout 
(Appears when you use 
PPPoA and PPPoE 
encapsulation)

Specify an idle time-out in the Max Idle Timeout field when you select 
Connect on Demand. The default setting is 0, which means the Internet 
session will not timeout.

Zero Configuration

Select this if you want the device to automatically try to configure the 
Internet connection. See the device’s User’s Guide for more information.

Subnet Mask (Appears 
when you use ENET 
ENCAP encapsulation)

Enter the subnet mask provided by your ISP.

ENET ENCAP Gateway 
(Appears when you use 
ENET ENCAP 
encapsulation)

Enter the IP address of the gateway provided by your ISP.

Apply

Click Apply to save the changes. 

Reset

Click Reset to begin configuring this screen afresh.

Table 27   Device Operation > Device Configuration > Network > WAN > Setup (Prestige)