Справочник Пользователя для Motorola 7.7.4

185

•

The hostname argument is the name of the device to which you want to connect; for 
example, 

•

The ip_address argument is the IP address, in dotted decimal notation, of the device 
to which you want to connect.

•

The port argument is the number of t he por t over which you want to open a telnet 
session.

ip_address | hostname )

Traces the routing path to an IP destination.

server_address] [filename] [confirm]

Copies the current configuration settings of the Motorola Netopia® Gateway to a TFTP (Triv-
ial File Transfer Protocol) ser ver. The TFTP ser ver must be accessible on your Ethernet net-
work. The server_address argument identifies the IP address of the TFTP ser ver on 
which you want to store the Motorola Netopia® Gateway settings. The filename argu-
ment identifies the path and name of the configuration file on the TFTP ser ver. If you 
include the optional 

 keyword, you will not be prompted to confirm whether or not 

you want to per form the operation.

Dumps the Motorola Netopia® Gateway’s configuration just as the 

 command does 

in config mode.

Displays the names of the current shell and PPP users. 

segment | end-to-end ]

Lets you check the ATM connection reachability and network connectivity. This command 
sends five Operations, Administration, and Maintenance (OAM) loopback calls to the speci-
fied vpi/vci destination. There is a five second total timeout inter val.