Справочник Пользователя для Motorola 7.7.4

187

Displays information about open PPP links. You can display a subset of the PPP statistics 
by including an optional 

, or 

 argument for the 

 command.

Opens a PPP link on the specified vir tual circuit.

You reach the configuration mode of the command line inter face by typing 

 (or 

any truncation of 

, such as 

or

) at the CLI SHELL prompt.

When you are in CONFIG mode, the CLI prompt consists of the name of the Motorola Neto-
pia® Gateway followed by your current 

node in the hierarchy and two right angle brackets 

(>>). For example, when you enter CONFIG mode (by typing 

 at the SHELL prompt), 

the 

 prompt reminds you that you are at the top 

of the CONFIG hierarchy. If you move to the 

 node in the CONFIG hierarchy (by typing 

 

at the CONFIG prompt), the prompt changes to 

 to 

identify your current location.

Some CLI commands are not available until cer tain conditions are met. For example, you 
must enable IP for an inter face before you can enter IP settings for that inter face.

•

Moving from CONFIG to SHELL — You can navigate from anywhere in the CONFIG 
hierarchy back to the SHELL level by entering 

 at the CONFIG prompt and pressing 

R

ETURN

. 

Netopia-3000/9437188 (top)>> 

Netopia-3000/9437188 >

•

Moving from 

 

to a subnode — You can navigate from the top node to a subnode 

by entering the node name (or the significant letters of the node name) at the CONFIG