Справочник Пользователя для Netopia PN Series

 

There are three ways to connect to the Netopia Router’s advanced 
configuration screens:

 

■

 

Through the console port, using a local terminal (see the 

 

Getting 

Started

 

 

 

Guide

 

)

 

■

 

Using Telnet with the Router’s Ethernet port IP address (cannot 
be used for initial configuration)

 

■

 

Over analog phone lines using a modem and terminal emulation 
software (see 

 below)

You can also retrieve the Netopia Router’s configuration information 
and remotely set its parameters using the Simple Network 
Management Protocol (see 

).

 

Note:

 

Web-based management does not support advanced 

configuration.

 

The Netopia Router has a SmartPort (also known as a PC Card port or 
a PCMCIA card port) for attaching a PC Card Type II modem. The port 
has two Type II slots and is located on the router’s left side behind a 
pull-down cover.

You may want to attach a Farallon approved PC Card modem to the 
Netopia Router to remotely configure it or to upgrade its firmware (see 

.) Contact Farallon 

Customer Service for information on Farallon approved PC Card 
modems.