Справочник Пользователя для Netopia PN Series
Configuring ISDN and Leased Line Connections
2-13
3.
Select Clock Source and press Return. From the pop-up menu,
highlight the clock source, that you wish to use. The choices
offered are Internal Clock Source, or Network Clock Source.
The default is Network. Press Return.
highlight the clock source, that you wish to use. The choices
offered are Internal Clock Source, or Network Clock Source.
The default is Network. Press Return.
4.
Select Data Link Encapsulation and highlight the method of
encapsulation that you want to use from the pop-up menu. The
choices offered are PPP, HDLC, and Frame Relay. The default
setting is Frame Relay. Press Return.
encapsulation that you want to use from the pop-up menu. The
choices offered are PPP, HDLC, and Frame Relay. The default
setting is Frame Relay. Press Return.
5.
You are now done configuring the Line Configuration screen.
Press the escape key to return to the WAN Setup screen. Go to
Press the escape key to return to the WAN Setup screen. Go to
, for information on how to configure your leased line
connection profile.
Connection profiles for ISDN and Leased lines
A connection profile is a set of parameters that tells the Netopia
Router how to connect to a remote destination. Connection profiles
are also used to make out-bound calls and optionally to help answer
calls.
Router how to connect to a remote destination. Connection profiles
are also used to make out-bound calls and optionally to help answer
calls.
Some Netopia models support up to 4 different connection profiles
while most models support up to 16 connection profiles.
while most models support up to 16 connection profiles.
To go to the Connection Profiles screen, select Connection Profiles
in the WAN Setup screen.
in the WAN Setup screen.