Справочник Пользователя для Netopia R3100

In most cases, this Smar tStar t configuration is all that you need to get your router up and running and 
connected to the Internet. However, you may want to take advantage of additional features or special 
configuration options available through the console-based configuration inter face. For detailed instructions, see 

Name and Password screen. Enter the username and 
password that identifies you to your ISP.

Note: Some automated profiles already specify name and 
password for you. in this case, the screen is filled out for 
you and automatically skipped.

When you have done this, click Next.

The Smar tStar t Wizard then posts your connection profile 
information to your router.

Now the 

 (shown below) 

appears. It allows you to test your connection to your ISP 
using the connection profile you have just created.

Connection Profile Test screen. Smar tStar t tests your 
connection profile by attempting to connect to your ISP.

To test the connection profile with your ISP, click Next.

While the test is running, Smar tStar t repor ts its progress 
in a brief succession of dialog boxes as described below.

Available Line Test Progress screen. Smar tStar t tests to 
see if the router can place calls on your telephone line. 
While it is testing the connection, a dialog box is 
displayed and the LEDs flash.

Connection Test Progress screen. Smar tStar t displays a 
dialog box showing you that your connection profile is 
being tested. If this test fails, check the physical 
connections between the computer, the router, and the 
wall jack or jacks. Check for errors in any manual entries 
you made during the configuration process.

Final screen. When the connection tests successfully, 
Smar tStar t displays a screen telling you that your 
configuration is now complete.