Справочник Пользователя для Netopia R5000

6.

Select Data Link Encapsulation and highlight the method of encapsulation that you want to use from the 
pop-up menu. The choices offered are PPP, HDLC, and Frame Relay. The default setting is Frame Relay. 
Press Return. 

7.

Select NEXT SCREEN and press Return. The Easy Setup Profile screen appears. See 

The DDS Line Configuration screen appears.

1.

Select Data Rate and press Return. From the pop-up menu, highlight the data rate that you want your 
DDS/ADN line connection to transmit at. The data rate choices are Automatic (the default), 56 kbps, and 
64 kbps. Press Return.

Note: As noted above, DDS/ADN Netopia Routers may run 56 kbps or 64 kbps data rates on permanent 
circuits. If you accept the default, Automatic, the router will hunt between modes until it can determine 
what the telephone company has provisioned your DDS/ADN line for.

2.

Select Data Link Encapsulation and highlight the method of encapsulation that you want to use from the 
pop-up menu. The choices offered are PPP, HDLC, and Frame Relay. The default setting is PPP. Press 
Return. 

3.

Select NEXT SCREEN and press Return. The Easy Setup Profile screen appears. See 

                            DDS Line Configuration

         Data Rate (kbps)...                Automatic

         Data Link Encapsulation...         PPP

         TO MAIN MENU                       NEXT SCREEN

Enter Information supplied to you by your telephone company.