Справочник Пользователя для Netopia R5000

The Serial Line Easy Setup screen appears.

1.

Select Circuit Type and press Return. From the pop-up menu, select your circuit type: Permanent Sync (the 
default) or Switched Async.

If you selected Permanent Sync (the default) proceed to Step 2.

If you selected Switched Async, the Data Rate defaults to 57.6 for a high speed modem. You can select 
other speeds, from 19.2 to 230.4 from the pop-up menu. Two additional fields are displayed: Modem 
Initialization String and Modem Dialing Prefix allow you to set modem parameters.

2.

Select Data Rate (kbps) and press Return. From the pop-up menu, select a fixed data rate for your digital 
line or select Auto. The Auto setting allows your Netopia Router to determine the data rate of your serial 
line at the time of circuit activation. Press Return. 

3.

Select Data Link Encapsulation and highlight the method of encapsulation that you want to use from the 
pop-up menu. The choices offered are PPP, HDLC, and Frame Relay. The default setting is Frame Relay. For 
an asynchronous modem, the only encapsulation is PPP. Press Return. 

4.

Select NEXT SCREEN and press Return. The Easy Setup Profile screen appears. See 

                             Serial Line Easy Setup

         Circuit Type...                    Permanent Sync

         Data Rate (kbps)...                Auto

         Data Link Encapsulation...         Frame Relay

         TO MAIN MENU                       NEXT SCREEN

Enter Information supplied to you by your telephone company.