Справочник Пользователя для Enterasys Networks X16-C
1-Gigabit Ethernet Transceiver Specifications (SFP)
Matrix X16-C Chassis Installation Guide A-5
The following XFP specifications in
meet or exceed the IEEE 802.3ae‐2002 standard.
1-Gigabit Ethernet Transceiver Specifications (SFP)
The following Small Form Factor Pluggable (SFP) optical transceivers are supported on the Matrix
X16‐C. Specifications for the following modules are described below.
X16‐C. Specifications for the following modules are described below.
•
MGBIC‐LC01
•
MGBIC‐LC03
•
MGBIC‐LC09
•
MGBIC‐MT01
•
MGBIC‐08
•
MGBIC‐02
Table A-9 Recommended Cable Types and Specifications
Item
Type
Max. Reach
Min. Reach
1
1. The limiting factor is saturation of the receiver by the transmitter. When presented with a signal at a strength
above the saturation point, the receiver cannot distinguish between pulses, though no hardware damage
occurs.
occurs.
Connector
10GBASE-LR-XFP
SMF (Single Mode Fiber)
10 km (6.21 mi)
2 m (6.6 ft)
LC
10GBASE-ER-XFP
SMF (Single Mode Fiber)
40 km (24.85 mi)
2
2. Links longer than 30 km for the same link power budget are considered engineered links. Attenuation for such
links needs to be less than the minimum
2 m (6.6 ft) with
minimum of 5 dB
attenuation
minimum of 5 dB
attenuation
LC
10GBASE-ZR-XFP
SMF (Single Mode Fiber)
80 km (49.7 mi)
2 m (6.6 ft) with
minimum of 11 dB
attenuation
minimum of 11 dB
attenuation
LC
10GBASE-SR-XFP
MMF (Multimode Fiber)
300 m (984 ft)
2 m (6.6 ft)
LC