Справочник Пользователя для Enterasys Networks E1 Series
VLAN Configuration Command Set
Configuring the VLAN Egress List
7-23
7.3.4.6
set vlan dynamicegress
Use this command to set the administrative status of the VLAN’s dynamic capability. If VLAN
dynamic egress is enabled, the device will add the port receiving a tagged frame to the VLAN egress
list of the port according to the frame VLAN ID. If the VLAN does not exist, it is created.
dynamic egress is enabled, the device will add the port receiving a tagged frame to the VLAN egress
list of the port according to the frame VLAN ID. If the VLAN does not exist, it is created.
set vlan dynamicegress vlan-id {enable | disable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable the dynamic egress function on VLAN 7:
vlan-id
Specifies the number of the VLAN on which to enable or
disable dynamic egress.
disable dynamic egress.
enable | disable
Enables or disables dynamic egress.
Matrix>set vlan dynamicegress 7 enable