Справочник Пользователя для Enterasys Networks E1 Series

To perform the following:

Assign incoming untagged frames to a specific VLAN according to the parameters in created 
classification rules. Only untagged frames are classified.

Drop untagged frames according to a VLAN based on Layer 2/3/4 of a received frame.

Display the VLAN ID (VID), protocol classification, and description of each classification of 
the current entries.

Add/delete a VID and associated classification entry.

The commands used to assign VLANs to classification rules are listed below and described in the 
associated section as shown.

show vlan classification (

)

set vlan classification (

clear vlan classification (

set vlan classification ingress (

clear vlan classification ingress (

Use this command to display the VLAN ID (VID), protocol classification, and description of each 
classification of the current entries.

show vlan classification

In addition to the commands described in this section, Matrix E1 (1G58x-09 and 1H582-xx) 
devices with firmware versions 2.05.xx and higher also support policy profile-based classification 
to a VLAN or Class of Service. Policy classification commands that can be used alternatively to 
VLAN classification commands are noted in the appropriate sections under the heading 
“Command Alternative (v2.05.xx and higher)”. For a description of the complete policy 
classification command set, refer to