Справочник Пользователя для Enterasys Networks E1 Series

This example shows how to display IP protocol information. In this case, the routing protocol is RIP 
(Routing Information Protocol). For more information on configuring RIP parameters, refer to 

Use this command to display memory usage information about IP protocols running on the device.

None.

Router command.

Global configuration: Matrix>Router(config)#

None.

Matrix>Router#show ip protocols

Routing Protocol is "rip"

  Sending updates every 30 seconds

  Next due in 19 seconds

  Invalid after 180 seconds, hold down 120, flushed after 300

  Incoming update filter list for all interfaces is not set

  Outgoing update filter list for all interfaces is not set

Default Version Control:

  Interface        Send        Recv        Key-chain

  Vlan    1        1           1

  Vlan    2        1           1

  Routing for Networks:

    182.127.0.0

  Routing Information Sources:

  Gateway        Distance        Last Update

  Distance: (default is 1)