Справочник Пользователя для Enterasys Networks E1 Series
Security Configuration Command Set
Configuring RADIUS
14-6
14.3.1.2 set radius
Use this command to enable, disable, or configure RADIUS authentication.
set radius {enable | disable | last-resort-action {local {accept | reject |
challenge} | remote {accept | reject | challenge}} | retries number-of-retries |
server index ip_address port server-secret | timeout timeout-value | mgmt-auth
{enable | disable}}
challenge} | remote {accept | reject | challenge}} | retries number-of-retries |
server index ip_address port server-secret | timeout timeout-value | mgmt-auth
{enable | disable}}
Syntax Description
Server IP
IP address of the RADIUS server.
Auth-Port
RADIUS server’s UDP authentication port.
Status
Whether the server is the primary or secondary RADIUS
server.
server.
RADIUS
last-resort-action
last-resort-action
Last resort action to be taken if the RADIUS server times
out during local or remote login. Possible actions are:
Accept (allows access), Reject (doesn’t allow access) and
Challenge (prompts for local password).
out during local or remote login. Possible actions are:
Accept (allows access), Reject (doesn’t allow access) and
Challenge (prompts for local password).
enable | disable
Enables or disables the RADIUS client.
last-resort-action Sets the action to be taken if the RADIUS server times out
during login.
local
Sets last-resort-action options for local (console port)
access.
access.
remote
Sets last-resort-action options for remote (Telnet or
WebView) access.
WebView) access.
accept
Allows access (via console port for local access, Telnet or
WebView for remote access) at the Read-Write level with
no further attempt at authentication.
WebView for remote access) at the Read-Write level with
no further attempt at authentication.
reject
Does not allow access.
challenge
Reverts to local passwords.
Table 14-1
show radius Output Details (Continued)
Output
What It Displays...