Справочник Пользователя для Enterasys Networks E1 Series

This example shows how to display MAC locking information for the end stations connected to Fast 
Ethernet front panel port 8: 

 provides an explanation of the command output.

Use this command to enable MAC locking on one or more ports. When enabled and configured for 
a specific MAC address and port string, this locks a port so that only one end station address is 
allowed to participate in frame relay. 

set maclock enable [port-string]

Matrix>show maclock stations fe.0.8 

 Number of stations found: 3 

 Port Number     MAC address 

Status               State 

 ------------    -----------------   ---------------      -------------- 

 fe.0.8          00-20-78-06-0e-a0 

active           

first learned 

 fe.0.8          00-44-55-44-55-21

active 

static 

 fe.0.8          00-a0-39-00-0c-7b

active           

first learned 

Port Number

Port designation. For a detailed description of possible 
port-string values, refer to 

MAC address

MAC address of the end station(s) locked to the port.

Status

Whether the end stations are active or inactive. 

State

Whether the end station locked to the port is a first learned, 
first arrival or static connection. 

NOTE: MAC locking is disabled by default at device startup. Configuring one or more 
ports for MAC locking requires globally enabling it on the device and then enabling it on 
the desired ports as described in