Справочник Пользователя для Dynalink RTA1025W

Chapter 5: Troubleshooting 

 

If the suggested solutions in this section do not resolve your issue, contact your 
system administrator or Internet service provider. 

Problems with LAN 

The chances are that the interface used as DHCP server is modified and the client 
PCs do not renew IP addresses.   

If your DHCP server is enabled on Private IP Address previously and you modify the 
interface to Public IP Address, the client PCs should renew IP addresses. 

Check that your PC is on the same subnet with the ADSL Router. 

Problems with WAN 

You cannot access the Internet. 

… 

Check the physical connection between the ADSL Router and the LAN. 

If the LAN LED on the front panel is off or keeps blinking, there may be problem 
on the cable connecting to the ADSL Router. 

At the DOS prompt, ping the IP address of the ADSL Router, e.g., ping 
192.168.1.1. If the following response occurs: 

Reply from 192.168.1.1: bytes=32 time=100ms TTL=253 

Then the connection between the ADSL Router and the network is OK. 

If you get a failed ping with the response of:   

Request timed out 

Then the connection is fail. Check the cable between the ADSL Router and the 
network. 

 

… 

Check the DNS setting of the ADSL Router. 

At the DOS prompt, ping the IP addresses of the DNS provided by your ISP. 
For example, if your DNS IP is 168.95.1.1, then ping 168.95.1.1. If the following 
response occurs: 

Reply from 168.95.1.1: bytes=32 time=100ms TTL=253             

Then the connection to the DNS is OK. 

If you get a failed ping with the response of: 

Request timed out 

Then the DNS is not reachable. Check your DNS setting on the ADSL Router.