Справочник Пользователя для Fortinet Version 3.0
FortiBridge Version 3.0 Administration Guide
36
09-30000-0163-20061109
Configuring FortiBridge probes
Configuration and operating procedures
Figure 13: Example FortiBridge application
Table 9
lists the internal network configuration.
Table 10
lists the basic FortiBridge unit configuration settings.
Configuring FortiBridge probes
To monitor a FortiGate unit for failure, you configure the FortiBridge unit to send
probe packets through the FortiGate unit. Using probe packets, the FortiBridge
unit can confirm that the FortiGate unit can process ICMP (ping), HTTP, FTP,
POP3, SMTP, and IMAP traffic. Until you configure probes, the FortiBridge unit
cannot detect if the FortiGate unit has failed.
probe packets through the FortiGate unit. Using probe packets, the FortiBridge
unit can confirm that the FortiGate unit can process ICMP (ping), HTTP, FTP,
POP3, SMTP, and IMAP traffic. Until you configure probes, the FortiBridge unit
cannot detect if the FortiGate unit has failed.
Table 9: Internal network configuration
FortiGate management IP address
172.20.120.10/24
Internal network subnet IP address
172.20.120.0/24
Router internal IP address
172.20.120.1/24
Internal network default route
172.20.120.1
Primary DNS server
172.20.120.2
Secondary DNS server
172.20.120.3
Syslog Server IP address
172.20.120.11
SNMP Manager IP address
172.20.120.12
Mail Server Name
mail.myorg.com
Table 10: Basic FortiBridge unit configurations settings
Administrator password
passWORD
Management IP address
172.20.120.20/24
Default route
172.20.120.1
Primary DNS server
172.20.120.2
Secondary DNS server
172.20.120.3
Router
INT 1
INT 2
EXT 1
EXT 2
Internal
External
Internal network
Syslog server
SNMP Manager
Mail server
Internet
(Transparent mode)
(Normal mode)