Справочник Пользователя для Huawei DR814Q

User Manual 
Aolynk DR814Q ADSL2+ Broadband Router 

4  Web-based Basic Configuration

 

25 

IP address of the virtual interface cannot be within the same subnet with that of the LAN 

port. 

The DR814Q can act as a DHCP server to automatically assign IP addresses within a 

certain range to any PC running in the LAN. 

Click the [DHCP] tab of the LAN setup page to enter the corresponding page shown in 

Figure 4-14, where you can configure DHCP server and DHCP relay. 

 

Figure 4-14 DHCP settings 

z 

Enable: Enable the DHCP server (default). 

z 

Disable: Disable the DHCP server. 

z 

DHCP Relay: Enable the DHCP relay. 

The DR814Q can act as a DHCP server and automatically assign IP addresses, 

according to the range defined in this page, to running PCs in the LAN. 

To make the DR814Q assign IP address to the DHCP client sending a request, select 

the Enable option in the [DHCP] status section, type in the start IP address and end IP 

address in the proper fields, and then click <Apply>. 

If necessary, you can type in commonly used DNS suffixes such as local.lan in the 

[Local Domain Name] text box. Thus, you can access the Web server whose host name 

is qqq by entering http://qqq in the Web browser instead of http://qqq.local.lan. Small 

and medium–sized enterprises can also set their own DNS suffixes here while home 

users need not.