Справочник Пользователя для Huawei DR814Q

User Manual 
Aolynk DR814Q ADSL2+ Broadband Router 

5  Advanced Configuration

 

50 

Example: Figure 5-14 illustrates a physical connection that requires static routes. 

 

Figure 5-14 Network diagram for the static route configuration 

In Figure 5-14, suppose that a DHCP service is configured for the DR814Q, the 

gateway address is 192.200.200.1, and there is a default route to broadband access 

server (BAS).A router is connected to another network segment, LAN2 (16.0.0.0/4), on 

the WAN side, and the IP address of the WAN port is 192.200.200.81. To make hosts in 

LAN1 access hosts in LAN2 normally, you need to create a route as below so that the 

DR814Q can choose routes for packets correctly. 

 

Figure 5-15 Example of the static route configuration 

The static route configuration makes the DR814Q to learn route information of other 

routers on the network through RIP. Click the [RIP] tab on the route setup page to enter 

the dynamic route configuration page shown in Figure 5-16.