Справочник Пользователя для RCA 360
4 Support
E-DOC-CTC-20031204-0011 v2.0
45
4.2.1 Upgrade via the SpeedTouch™ Upgrade
Wizard
Introduction
The procedure described in this section are valid only in case:
•
You run an MS Windows Operating System or Mac OS X.
•
Your SpeedTouch™ and computer are properly connected:
•
Through Ethernet or USB in case you run an MS Windows OS
•
Through Ethernet in case you run Mac OS X
•
The new system software file is of the type bant-f_XX42xx.bin,
e.g. bant-f_AA4279.bin.
e.g. bant-f_AA4279.bin.
During the upgrade procedure all configuration settings are backed up by the wizard
and restored after uploading the system software.
and restored after uploading the system software.
Starting the
SpeedTouch™ Upgrade
wizard
Depending on your Operating System, you must start the SpeedTouch™ Upgrade
wizard as follows:
wizard as follows:
On MS Windows
Operating Systems
Proceed as follows:
1
Insert the SpeedTouch™ Setup CD-ROM in your PC's CD-ROM drive. The
SpeedTouch™ CD Browser will start automatically.
SpeedTouch™ CD Browser will start automatically.
Note
If the SpeedTouch™ CD Browser window does not appear automati-
cally, open a Run window via Start > Run from the Start menu and
enter following path: D:\Menu.exe, where D is the drive letter of your
CD-ROM drive.
cally, open a Run window via Start > Run from the Start menu and
enter following path: D:\Menu.exe, where D is the drive letter of your
CD-ROM drive.
2
The Choose Language window prompts you to select a language.
Select the language of your choice and click OK.
Select the language of your choice and click OK.
Note
The selected language will also be used as default language in the
SpeedTouch™ web pages. See
SpeedTouch™ web pages. See
for more infor-
mation on how to change the web page language.
Topic
Page