Справочник Пользователя для RCA 360

4   Support

E-DOC-CTC-20031204-0011 v2.0

4.3 Resetting the SpeedTouch™

Reset to default 

configuration

Proceed as follows:

Make sure the SpeedTouch™ is powered on (Power LED is solid green).

Use a pencil to press the recessed reset button (

) on the SpeedTouch™ rear 

panel for at least six seconds until all the LEDs on the front panel turn off

As soon as all the LEDs on the front panel go off, release the reset button. This 
indicates that the SpeedTouch™ is restarting in its default configuration.

Make sure to release the reset button as soon as all the LEDs have 
gone off to prevent that the SpeedTouch™ enters BootP mode.

The SpeedTouch™ will come online again with default settings.

D