Справочник Пользователя для Transition Networks SAPTF33xx-100
Technical Specification
For use with Transition Networks Model SAPTF33xx-1xx or equivalent
Standards
FCC Part 68, TBR21
Dimensions
3.6" x 4.5" x 1.8" (91 mm x 115 mm x 45 mm)
Shipping Weight
1 lb. (0.45 kg) (approximate)
Power Consumption
7.0 watts
Power Supply
12VDC, 0.8 Amp (North America, Europe, UK)
12VDC, 1.25 Amp (Latin Am., Japan, N.Z., Australia, S. Africa)
The external power supply provided with this product is UL
listed by the power supply’s manufacturer.
12VDC, 1.25 Amp (Latin Am., Japan, N.Z., Australia, S. Africa)
The external power supply provided with this product is UL
listed by the power supply’s manufacturer.
MTBF
47,000 hours (MIL217F2 V5.0) (MIL-HDBK-217F)
115,000 hours (Bellcore7 V5.0)
115,000 hours (Bellcore7 V5.0)
Environment
Tmra*:
0° to 50°C (32° to 122° F )
Storage Temp:
-15° to 65°C (-4° to 122°F)
Humidity:
5 to 95%, non condensing
Altitude:
0 to 10,000 feet
Warranty
Lifetime
*Manufacturer’s rated ambient temperature.
The information in this user’s guide is subject to change. For the most up-to-date
information on the SAPTF33xx-1xx media converter, view the user’s guide on-line at:
www.transition.com.
information on the SAPTF33xx-1xx media converter, view the user’s guide on-line at:
www.transition.com.
Product is certified by the manufacturer to comply with DHHS Rule 21/CFR, Subchapter J
applicable at the date of manufacture.
applicable at the date of manufacture.
CAUTION: Visible and Invisible Laser Radiation When Open. Do Not Stare Into Beam Or
View Directly With Optical Instruments.
View Directly With Optical Instruments.
CAUTION: Use of controls, adjustments or the performance of procedures other than
those specified herein may result in hazardous radiation exposure.
those specified herein may result in hazardous radiation exposure.
12
SAPTF33xx-1xx
24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600
RJ-11C Connector Specification
Unit A (Telephone Emulation)
Connector:
RJ-11C
Impedance:
600
Ω
REN:
0.4 B
Loop Current:
10 to 100 mA
Insertion Loss:
0.0 ± 1.0 dB at 1000 Hz
(When both ports are terminated at 600
(When both ports are terminated at 600
Ω.)
Unit B (Central Office Emulation)
Connector:
RJ-11C
Impedance:
600
Ω
Battery Source:
48 VDC +/- 5V
Ringing Supply:
90 Vp-p
RIng Frequency:
15-30 Hz (Reproduces the frequency detected by Unit A.)
Ring Cadence:
Reproduces the cadence detected by Unit A.
Insertion Loss:
0.0 ± 1.0 dB at 1000 Hz
(When both ports are terminated at 600
(When both ports are terminated at 600
Ω.)
13
techsupport@transition.com
Click the “Transition Now” link for a live Web chat.
Troubleshooting
1.
Is the PWR (power) LED illuminated?
NO
NO
•
Is the power adapter the proper type of voltage and cycle frequency
for the AC outlet? (See “Power Supply” on page 12.)
for the AC outlet? (See “Power Supply” on page 12.)
•
Is the power adapter properly installed in the media converter and in
the outlet?
the outlet?
•
Does the external power source provide power?
•
Contact Technical Support: US/Canada: 1-800-260-1312,
International: 00-1-952-941-7600.
International: 00-1-952-941-7600.
YES
•
Proceed to step 2.
2.
Is the SDF (signal detect fiber Link) LED illuminated?
NO
NO
•
Check the fiber cables for proper connection.
•
Verify that the TX and RX cables on the first media converter are
connected to the RX and TX ports, respectively, on the second media
converter.
connected to the RX and TX ports, respectively, on the second media
converter.
•
Contact Technical Support: US/Canada: 1-800-260-1312,
International: 00-1-952-941-7600.
International: 00-1-952-941-7600.
•