Справочник Пользователя для RCA 605
141
E-DOC-CTC-20051017-0151 v1.0
Chapter 5
Expert Configuration
5.4.3 Routed PPPoA
Introduction
The Routed PPPoA configuration page allows you to add new Routed PPPoA
connection entries or to change settings of existing entries.
connection entries or to change settings of existing entries.
Creating a Routed
PPPoA connection
entry
To add a Routed PPPoA connection entry:
1
Click New.
2
In the Interface box, type a unique interface name (different from the MER
interface name).
interface name).
3
In the Destination list, click the appropriate Routed Ethernet destination
indicated by the Routed Ethernet interface name
indicated by the Routed Ethernet interface name
4
Type user name and password for the account at the ISP [optional].
5
Click Apply.
Additional configuration
Once created, per Routed PPPoA connection, additional configuration is possible by
clicking:
clicking:
Routing
Following fields are available:
Destination:
Controls the networks that can be reached via this particular PPP connection.
Specify the remote host or network in prefix notation. e.g. 172.16.0.0/16.
Controls the networks that can be reached via this particular PPP connection.
Specify the remote host or network in prefix notation. e.g. 172.16.0.0/16.
Label:
Allows you to assign a label to this connection.
Allows you to assign a label to this connection.
These parameters can only be modified when the link is down. Take the link
down first by clicking Hang-up.
down first by clicking Hang-up.