Справочник Пользователя для ATTO Technology 3100
14
4.5 Serial port configuration panel
The Serial Port Configuration panel configures the communication parameters for the RS-232 link on
the FibreBridge. These settings must match settings selected on your host computer in order to establish
a link. Some parameters will be “grayed out” if they do not apply to your model of the FibreBridge or
if they have no effect based upon the selected value of a related parameter.
the FibreBridge. These settings must match settings selected on your host computer in order to establish
a link. Some parameters will be “grayed out” if they do not apply to your model of the FibreBridge or
if they have no effect based upon the selected value of a related parameter.
The number of data bits is fixed at eight for the FibreBridge.
Parity is always disabled.
Parity is always disabled.
Baud Rate (default = 9600)
Modifies the baud rate. The FibreBridge is capable of 2400,
9600, 19200, 38400, 57600 or 115200 bits per second.
9600, 19200, 38400, 57600 or 115200 bits per second.
Flow Control (default = None)
Selects the method for data handshaking between the
FibreBridge and the host computer. Serial port flow control
can be managed using either hardware flow control,
software flow control (Xon/Xoff) or no flow control.
can be managed using either hardware flow control,
software flow control (Xon/Xoff) or no flow control.
Stop Bits (default = 1)
Configures the number of stop bits per character to either
one or two.
one or two.
Some options will be “grayed out” on the panel: they are not available because of the type of access mode or FibreBridge model or they have no effect based on other
selections. The chart below shows options available based on model and access method.
Access method
Options
2200/3200
in-band
2200/3200
Ethernet
2200/3200
serial port
4500
in-band
4500
Ethernet
4500
serial port
Baud rate
●
●
●
●
●
●
Flow control
●
●
●
●
●
●
Stop bits
●
●
●
●
●
●