Справочник Пользователя для ASUS RT-N10U
17
RT-N10U
Chapter 3: Configuing the network clients
Accessing the wireless router
Setting an IP address for wired or wireless clients
To access the ASUS Wireless Router, you must have the correct TCP/IP settings
on your wired or wireless clients. Ensure that the clients’ IP addresses are within
the same subnet as the ASUS Wireless Router.
By default, the ASUS Wireless Router uses DHCP to automatically assign IP
By default, the ASUS Wireless Router uses DHCP to automatically assign IP
addresses to the clients in your network.
You may, however, want to manually assign static IP addresses on some of the
You may, however, want to manually assign static IP addresses on some of the
clients or computers in your network rather than automatically getting IP addresses
from your wireless router.
Follow the instructions below that correspond to the operating system installed on
Follow the instructions below that correspond to the operating system installed on
your client or computer.
3
Configuring the
network clients
In the Router mode, if you want to manually assign an IP address to your client, we
recommend that you use the following settings:
• IP address: 19.168.1.xxx (xxx can be any number between and 5. The IP
address should not used by another device)
• Subnet Mask: 55.55.55.0 (same as the ASUS Wireless Router)
• Gateway: 19.168.1.1 (IP address of the ASUS Wireless Router)
• DNS: 19.168.1.1 (ASUS Wireless Router) or assign a known DNS server in your
• Gateway: 19.168.1.1 (IP address of the ASUS Wireless Router)
• DNS: 19.168.1.1 (ASUS Wireless Router) or assign a known DNS server in your
network
7656_rtn10u.indd 17
8//1 10:05:9 AM