Справочник Пользователя для ASUS RT-N10U

6

RT-N10U

Chapter 4: Network configuration using the web GUI

You wireless router uses DHCP to assign IP addresses automatically on your 

network. You can specify the IP address range and lease time for the clients on 

your network.

To configure the DHCP server:
1.  Click LAN on the left navigation panel.

.  Click the DHCP Server tab.

.  In the Enable the DHCP Server? field, tick Yes.

.  In the IP Pool Starting Address field, key in the starting IP address.

5.  In the IP Pool Ending Address field, key in the ending IP address.

•  ASUS recommeds that you use an IP address format of 19.168.1.xxx (where xxx can be 

any number between  and 5) when specifying an IP address range.

•  An IP Pool Starting Address should not be greater than the IP Pool Ending Address.

6.  In the Lease Time field, specify in seconds when an assigned IP address 

will expire. Once it reaches this time limit, the DHCP server will then assign 

a new IP address.

The ASUS wireless router can support up to 5 IP addresses on your network.

7656_rtn10u.indd   6

8//1   10:05:57 AM