Справочник Пользователя для ASUS RT-N10U

5

RT-N10U

Chapter 5: Using the Utilities

Firmware Restoration is used on an ASUS Wireless Router after a failed firmware 
upgrade. This utility uploads a firmware file to the wireless router. The process takes 
about three to four minutes.

1.  Unplug the wireless router from its power source.

.  While holding down the Reset button at the back of the wireless router, plug the 

wireless router into a power source. Release the Reset button when the Power 

LED at the front panel begins to flash slowly, which indicates that the wireless 

router is in rescue mode.

.  Use the following to set up your TCP/IP settings:

IP address: 19.168.1.x

Subnet mask: 55.55.55.0

.  From your computer’s desktop, click

Start > All Programs > ASUS Utility RT-N10U Wireless Router > Firmware 

Restoration.

Launch rescue mode before using the Firmware Restoration utility.

The Firmware Restoration utility is not used to upgrade the firmware of a working ASUS Wireless 

Router. Normal firmware upgrades must be done through the web GUI. Refer to Upgrading the 

firmware on page  for more details.

5.  Click Browse to navigate to a firmware file, then click Upload.

7656_rtn10u.indd   5

8//1   10:06:0 AM