Справочник Пользователя для ASUS RX3141

55 

9.4  Configuring Inbound ACL Rules 

By creating ACL rules in Inbound ACL configuration page as shown in Figure 9.2, you can control (allow or 
deny) incoming access to computers on your LAN. 

Options in this configuration page allow you to: 

f  Add a rule, and set parameters for it 
f  Modify an existing rule 
f Delete 

an 

existing rule 

f  View configured inbound ACL rules 

To add an inbound ACL rule, follow the instructions below: 

1.  Open the Inbound ACL Rule configuration page, as shown in Figure 9.2, by double clicking the 

 

ΠInbound ACL menu. 

2. Select 

“Add New” from the “ID” drop-down list. 

3.  Set desired action (Allow or Deny) from the “Action” drop-down list. 

4.  Make changes to any or all of the following fields: source/destination IP, source/destination port, 

protocol, ICMP message type and log. Please see Table 9.3 for explanation of these fields. 

5.  Assign a priority for this rule by selecting a number from the “Move to” drop-down list. Note that 

the number indicates the priority of the rule with 1 being the highest. Higher priority rules will be 
examined prior to the lower priority rules by the firewall. 

6.  Click on the 

 button to create the new ACL rule. The new ACL rule will then be 

displayed in the inbound access control list table at the bottom half of the Inbound ACL 
Configuration page.