Справочник Пользователя для ASUS RX3141

Figure 9.3 illustrates how to create a rule to allow inbound HTTP (i.e. web server) service. This rule allows 
inbound HTTP traffic to be directed to the host w/ IP address 192.168.1.28. Note that the newly added inbound 
ACL rule is displayed in the Existing Inbound ACL table shown in Figure 9.4. 

 

 

To modify an inbound ACL rule, follow the instructions below: 

1.  Open the Inbound ACL Rule configuration page, as shown in Figure 9.2, by double clicking the 

 

ΠInbound ACL menu. 

2.  Click on the   icon of the rule to be modified in the inbound ACL table or select the rule number 

from the “ID” drop-down list. 

3.  Make desired changes to any or all of the following fields: action, source/destination IP, 

source/destination port, protocol, ICMP message type and log. Please see Table 9.3 for 
explanation of these fields. 

4.  Click on the 

 button to modify this ACL rule. The new settings for this ACL rule will 

then be displayed in the inbound access control list table at the bottom half of the Inbound ACL 
Configuration page. 

To delete an inbound ACL rule, open the Inbound ACL Rule configuration page by double clicking the Router 
Setup

 

ΠInbound ACL menu and then click on the   in front of the rule to be deleted.