Справочник Пользователя для Avaya X330WAN
Interface Serial CLI Commands
Avaya X330WAN User’s Guide
129
show controllers remote
Use the
show controllers remote
command to display far end performance data
through an FDL message.
Note:
This command is used when the
fdl at&t
option is defined.
Syntax
show controllers remote
<port> <fdl-request-type>
Parameters
Example
X330WAN-2DS1-1(super)# show controllers remote 1 1h-data
shutdown (Controller context)
Use the
shutdown
command to shutdown the E1/T1 link. This has the effect of
administratively bringing the line down. In effect, it sends a 'blue alarm' on the line.
The
The
no
form of this command reconnects the E1/T1 link.
Syntax
[no] shutdown
Interface Serial CLI Commands
This section contains a list of all Interface Serial related CLI commands.
backup delay (Serial interface context)
Use the
backup delay
command to set the switchover delay in case of failure.
Syntax
backup delay
<failure delay> <secondary disable delay>
port
The number of the port.
fdl-request- type
Request types include:
• 1h-data.
• Enhanced-CI-configuration.
• Enhanced-1h.
• Errored-ESF-data.
• 1h-data.
• Enhanced-CI-configuration.
• Enhanced-1h.
• Errored-ESF-data.