Справочник Пользователя для ZyXEL Communications NWA1100-N

 Chapter 3 Status Screens

NWA1100-N User’s Guide

Use this screen to view read-only information, including 802.11 Mode, Channel ID, Retry Count and 
FCS Error Count. Also provided is the "poll interval". The Poll Interval field is configurable. The 
fields in this screen vary according to the current wireless mode of each WLAN adaptor.

Click Status > Statistics. The following screen pops up.

System Status: Statistics

The following table describes the labels in this screen.

LAN

This field displays the number of wireless clients currently associated to 
the first wireless module. Each wireless module supports up to 32 
concurrent associations. 

WLAN

This field displays the number of wireless clients currently associated to 
the second wireless module. Each wireless module supports up to 32 
concurrent associations.

System Status

Statistics

Click this link to view port status and packet specific statistics. See 

Association List

Click this to see a list of wireless clients currently associated to each of 
the NWA’s wireless modules. See 

.

View Log

Click this to see a list of logs produced by the NWA. See 

The Status Screen (continued)

System Status: Show Statistics

Description

This is the wireless LAN adaptor. 

802.11 Mode

This field shows which 802.11 mode the NWA is using.

Channel ID

Click this to see which wireless channels are currently in use in the local area. 
See 

.

RX PKT

This is the number of received packets on this port.

TX PKT

This is the number of transmitted packets on this port.

Retry Count

This is the total number of retries for transmitted packets (TX).

FCS Error Count

This is the ratio percentage showing the total number of checksum error of 
received packets (RX) over total RX.

Poll Interval

Enter the time interval for refreshing statistics.

Set Interval

Click this button to apply the new poll interval you entered above.

Stop

Click this button to stop refreshing statistics.