Справочник Пользователя для Hitachi CP-X3021WN

11

Setting up

• Before connecting the projector to a computer, consult the computer’s 

manual and check the compatibility of the signal level, the synchronization 

methods and the display resolution output to the projector. 

-  Some signal may need an adapter to input this projector.

-  Some computers have multiple screen display modes that may include some 

signals which are not supported by this projector.

-  Although the projector can display signals with resolution up to UXGA  

(1600x1200), the signal will be converted to the projector’s panel resolution 

before being displayed. The best display performance will be achieved if the 

resolutions of the input signal and the projector panel are identical.

• If you connect this projector and a notebook computer, you need output the 

display to an external monitor, or output simultaneously to the internal display 

and an external monitor. Consult the computer's manual for the setting.

• Depending on the input signal, the automatic adjustment function of this 

projector may take some time and not function correctly. 

-  Note that a composite sync signal or sync-on-green signal may confuse the 

automatic adjustment function of this projector (

41). 

-  If the automatic adjustment function does not work correctly, you may not see 

the dialog to set the display resolution. In such a case, use an external display 

device. You may be able to see the dialog and set an appropriate display 

resolution.

NOTE

(continued on next page)