Справочник Пользователя для Hitachi CP-X3021WN

12

Setting up

(continued on next page)

• If an oversized USB storage device blocks the LAN port, use a USB 

extension cable to connect the USB storage device.

NOTE

► Before connecting the projector to a network system be sure 

to obtain the consent of the administrator of the network.
►Do not connect the LAN port to any network that might have the excessive 
voltage.
►The designated USB wireless adapter that is sold as an option is required to 
use the wireless network function of this projector.
►Before removing the USB storage device from the port of the projector, be 
sure to use the REMOVE USB function on the thumbnail screen to secure your 
data (

83). 

►Do not use any extension cable or device when connecting the adapter to the 
projector. Before you insert or pull out the USB wireless adapter from the projec-
tor, turn off the power of the projector and pull out the power cord’s plug from the 
outlet. Do not touch the USB wireless adapter while the projector is receiving AC 
power.
►To connect both the LAN cable and USB device to the projector, use a LAN 
cable that is  at on the side where the plug’s wire is visible. Otherwise, both of 
them cannot be connected correctly, or the wire may break (malfunction).

CAUTION

(optional)