Справочник Пользователя для Epson TM-P60
Rev. D
Setup 2-11
TM-P60 Technical Reference Guide
DSW 1 is fixed to OFF.
Note:
Serial communication setting is assigned to MemorySwitch (baud rate, parity). See the table “ Customize
values” (page 2-12) for details.
values” (page 2-12) for details.
3. After set the DIP switch, attach the DIP switch cover.
2.5.3 Memory Switches
This printer has a set of software switches called “Memory switches“ . The memory switch set
has “Msw 8,” “Customize value,” “Serial communication condition.”
has “Msw 8,” “Customize value,” “Serial communication condition.”
The “Memory switch setting utility” can change the Memory switch set to ON or OFF as shown
in the table below:
in the table below:
Note:
When you use this printer with RS-232C interface, you should adjust the “serial communication setting“
(see the table “ Serial communication” (page 2-12).)
(see the table “ Serial communication” (page 2-12).)
The Memory switch can be changed by either one of two methods:
• Memory switch setting utility
• Control by an ESC/POS command
• Memory switch setting utility
• Control by an ESC/POS command
Settings of the memory switch are stored in the NV memory; therefore, even if the printer is turned off, the
settings are maintained. Excessive use of this function may destroy the NV memory. As a guideline, do
not use this function more than 10 times a day.
settings are maintained. Excessive use of this function may destroy the NV memory. As a guideline, do
not use this function more than 10 times a day.
When you use OPOS or APD, generally you don’t need to adjust memory switch because OPOS or APD
are able to set these items automatically.
are able to set these items automatically.
* : Default setting
DIP switch
Handshake
DSW1
DSW2
DSW3
DSW4
DTR/DSR
OFF
ON
OFF
ON
RTS/CTS
OFF
OFF
ON
OFF
Memory Switch 8
SW
Function
On
Off
1
Status notice *1
Transmit s*
Doesn’t transmit
2
Beeper tone when the battery is not
charged
charged
Beeps *
Doesn’t beep
3
Beeper tone when this printer can’t
connect to any access point
connect to any access point
Beeps *
Doesn’t beep
4
Beeper tone when roll paper is out
Beeps *
Doesn’t beep
5
Beeper tone when an error occurs
Beeps *
Doesn’t beep
6 ~ 8 Reserved
-
Fixed to Off *