Справочник Пользователя для KYOCERA 2020D

7-78

Using the Operation Panel

The administrator setting is a function that identifies the user who can 
use the printer and can be used to manage users. The administrator is 
authenticated by the entered administrator ID and password and can 
then use the printer's security functions and Job Accounting functions. 

The options available in Admin are as follows:

ID (Administrator ID input)

Password (Administrator password input)

Change ID (Administrator ID change)

Change Password (Administrator password change)

1

Press 

[MENU].

2

Press 

U or V repeatedly until Admin > appears. 

You can use this to set the administrator ID. The default setting is the 
numeric part of your printer's model name. If you use FS-2020D, enter 
"

2020".

1

Press 

Z while Admin > is displayed.

2

The message display shows 

ID and a blinking cursor (_).

3

Press 

U or V to increase or decrease, respectively, the value at the 

blinking cursor. Enter the specified ID. Use 

Y and Z to move the 

cursor right and left. Enter an ID consisting of between 1 and 16 
numbers.

4

Press 

[OK]. Proceed to the next step Password (Administrator 

You can use this to set the administrator password. The default setting is 
the numeric part of your printer's model name. If you use FS-2020D, 
enter "

2020".

1

When you entered the ID in the previous step (ID (Administrator ID 
input)), the message display shows 

Password (Administrator 

password input) and a blinking cursor (

_).

2

Press 

U or V to increase or decrease, respectively, the value at the 

blinking cursor. Enter the specified password. Use 

Y and Z to move 

the cursor right and left. Enter a password consisting of between 0 
and 16 numbers

.

Admin          >

ID
_

If you enter the incorrect administrator ID or password, 

the 

Wrong ID or Wrong Password message appears and 

the input screen then reappears. Re-enter the ID or password 
correctly.

Password
_