Справочник Пользователя для Mitsubishi Electronics CPK60DWS

After installing the print paper, install the ink cassette into this unit.

Before installing the ink cassette into this unit, load the ink ribbon in the ink cassette.

It is recommended to clean the thermal head to keep good print quality when you replace 

the print paper and ink ribbon.

•  Place the ink cassette on a flat surface, when loading the ink ribbon.

•  Select a place that is free of dust when loading the ink ribbon. Dust or dirt 

settling on the ink ribbon results in poor print quality.

•  Make sure that the shafts of the ink ribbon fit into the ink cassette firmly.

Make sure to load it in the correct position.

3

4

1

2

3

4

1

2

Ink ribbon

Shaft

Ink cassette

Handle

Ditch

Make sure to set the ink ribbon roller to the ditches firmly.

Turn the shaft to eliminate any slack.

To insert the ink cassette, align the protrusions on both sides of the 

cassette with the right and left guides inside the printing unit and slide it in 

a slanting direction.

Mount the ink cassette to the back firmly by holding the handle.

Do not touch the thermal head.

Fingerprints or dust on the thermal head will degrade the print quality.

Do not touch the thermal head right after printing because it is 

extremely hot. Otherwise you may get burned or injured.

Note that the thermal head is quite sensitive to static electricity. When 

you touch the thermal head while carrying static electricity on your 

body, the thermal head may be damaged. 

Handle

Protrusion

Guides