Справочник Пользователя для Mitsubishi Electronics CPK60DWS

ARA

BEFORE OPERATION

Push the printing unit to close.

Close the printing unit by pushing the right and left sides of the unit from the front

with both hands.

When a new paper is loaded and the printing unit is closed with the power turned

on, the paper will be automatically fed and cut.

CAUTION

When closing the printing unit, be careful not to get your hands caught

between the printer and the printing unit. Otherwise, you may get injured.

NOTE

• When closing the printing unit, push it until a click is heard.

• If the PAPER RIBBON indicator illuminates when the printing unit is closed, the

print paper may have not been installed correctly.

In this case, open the printing unit to make sure that the print paper has been

installed correctly. Then close the printing unit again.

• When the paper roll is reinstalled more than three times, the print paper may be

used up earlier than the ink ribbon.

Installation of the print paper and the ink ribbon is completed.

NOTE

• Make sure to replace the print paper and the ink ribbon simultaneously. A large

amount of print paper may remain depending on the used condition.

NOTE

• Empty the paper strip bin frequently to prevent jamming the strips at the print

outlet. Whenever you replace the paper and ink ribbon, make sure to throw

away the paper strips in the paper strip bin.

• Whenever you replace the print paper and the ink ribbon, clean the thermal